Electronics

Keysight Technologies originated from Hewlett-Packard (HP) which began its work in 1938 by creating audio oscilators. After many years of creating hardware in 1999 HP announced a strategic realignment to create an independent measurement company composed of test and measurement components, chemical analysis and medical businesses, and a separate computing and imaging company called Agilent Technologies. And in 2013 Agilent Technologies announced that it will split into two separate measurement companies. The new electronic measurement company is called Keysight Technologies which is responsible for many leadership and industry leading rewards in developing cutting edge hardware and software solutions for industries like:

• Aerospace and Defence
• Automotive
• Communications
• Education
• Goverment, Finance and Enterprise
• Healthcare
• Industrial and Utilities
• Quantum
• Semiconductor
• Service provider
• Space networks
• Wireless

Our partners at Pendulum technologies company roots date back to the 1950’s, when Pendulum was the Swedish branch of Philips Test & Measurement division. Pendulum Instruments was a spin-off in 1998, and has grown substantially since then, via its own development and acquisitions. Today, in around 100 countries worldwide Pendulum Technologies products fit the needs of these industries:

• Metrology
• Aerospace and Defense
• Telecomunications
• Oscillator manufacturing
• RF and Microwave
• Electronic Industries
• Contract manufacturing
• Automotive

Whether you design, debug, or perform compliance tests, you need proven measurement technology to be successful. Our oscilloscope hardware, with industry-leading signal integrity, high effective number of bits (ENOB), and the fastest waveform update rates, captures the true performance of your device under test. Couple this with superior protocol decoding, analysis, and compliance software, and you’re guaranteed to get measurements you can trust.

We can offer these osciloscopes from Keysight Technologies:

• DCA Equivalent-Time (sampling) osciloscopes.

• Handheld, modular, and USB osciloscopes.

Don't compromise quality for size. Analyze your devices with the same InfiniiVision technology in smaller or portable form factors with the frequency ranging from 100 MHz to 1 GHz.

Keysight designed multimeters come with built-in technology that eliminates extraneous noise factors from the true measurement to make a big difference to your accuracy. These digital multimeters ensure a good balance of measurement resolution, linearity, and accuracy, all derived and guaranteed per ISO/IEC 17025 industry standards.

We can offer these multimeters from Keysight Technologies:

• Benchtop 

• Handheld

• Modular systems are offered in two types PXI and USB

• Specialty systems are highly accurated and extremely fast DMM's, reserved for very special measurements

The Keysight 53200 Series of 350 MHz universal and RF frequency counter/timers serve all of your frequency and time interval measurement needs. 3 available models offer resolution capabilities up to 12 digits/sec single-shot frequency resolution on a one second gate. Single-shot time interval measurements can be resolved down to 20 psec. All models in 53200 series offer new built-in analysis and graphing capabilities to maximize the insight and information you receive. Use the connectivity of your choice: LXI-C/Ethernet, USB, GPIB. Additionally, an optional battery is available to increase portability and maintain timebase accuracy.

• 53210A: 350 MHz RF Frequency Counter, 10 digit/sec (1 channel)
• 53220A: 350 MHz Universal Frequency Counter/Timer, 12 digit/sec, 100 ps (2 channels)
• 53230A: 350 MHz Universal Frequency Counter/Timer, 12 digit/sec, 20 ps (3 channels)

Whether you work in research and development (R&D), production, or quality assurance, we deliver complete impedance measurement solutions to meet your needs. This includes LCR meters, impedance meters, and a wide variety of test accessories. Achieve success with Keysight’s impedance measurement solutions.

• Benchtop LCR meters

Frequency ranges from 20 Hz to 300 M/500 M/1 G/3 GHz

• Impedance analyzers

Frequency ranges from 20 Hz to 3 GHz, with a 40-V built-in DC bias source, basic accuracy from 0.045% to 0.65%.

• Handheld capacitance and LCR meters

Maximum counts resolution 20 000, basic accuracy 0,2%, max test frequency 100 kHz

On a bench or in a system, Keysight variable DC power supplies are ready for your application, offering optimal voltage, current, capability and performance choices. Catalogue is divided into:

• Bench power supplies

Output numbers are ranging from 1 to 3, power is ranging from 30 to 800 W, with maximum 0.04% accuracy.

• ATE system power supplies

Output numbers are ranging from 1 to 4, power from 400 to 20000 W, with maximum current per output at 800A.

• DC power solutions for different applications like noise generation, Photovoltaic Array Simulator, Battery Emulator and Profiler and much more.

Keysight provides single-phase and three-phase AC power supplies to help you test a variety of AC-powered devices.

• 3-phase AC power sources

• Basic AC power sources

• Performance AC power sources / analyzers

• Regenerative 3-phase AC Emulator

Keysight's DC electronic loads provide you with new levels of test insights for devices such as power supplies, batteries, and DC to DC converters. Advanced capabilities available include a built-in datalogger, scope functionality, sequencing capabilities, and highly accurate measurement systems (≤ 0.05%) for detailed analysis.

• The Keysight EL30000A Series programmable DC electronic loads provide superior performance in compact bench form factor. Single and dual-channel models are available with up to 600W.
• Add a DC electronic load to your Keysight N6700 Series power supply and test devices that store or convert energy. The N6790 Series electronic load modules come in two sizes: single-wide 100 W and double-wide 200 W modules.
• The Keysight N3300A and N3301A are mainframes with slots that accept combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration.

The Keysight IntegraVision AC power analyzer is an intuitive combination of accurate power measurements and touch-driven oscilloscope visualization. Within a single instrument, it delivers the dynamic views you need to see, measure, and prove the performance of your design. Keysight offers two options for AC analyzers, based on the number of phases in tested grid:

• PA2201A (1-Phase AC),

2 channels, basic accuracy 0,05%, best power accuracy 0,1%, maximum current direct input 2 A / 6 A Peak.

• PA2203A (3-Phase AC),

4 channels, basic accuracy 0,05%, best power accuracy 0,1%, maximum current direct input 2 A / 6 A Peak.

The Keysight DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring direct current (DC) voltage and current into a device under test (DUT). The DC power analyzer is a highly integrated instrument that combines up to four advanced DC power supplies or electronic loads plus a digital multimeter (DMM), oscilloscope, arbitrary waveform generator (AWG), and datalogger. With an easy-to-use interface, the instrument’s sourcing and measuring functions are accessible from the front panel. Two different DC power analyzers, one with standard (N6705C) and the other with custom (N6715C) configurations.

Function generator offers the standard signals and features you expect — modulation, sweep, and burst. It also has features that give you the capabilities and flexibility you need to get your job done quickly, no matter how complex. Keysight offers these function generators:

• 1 channel generators

Achieving sampling rate from 160 MSa/S to 1GSa/s, frequency range from 1 µHz to 120 MHz.

• 2 channel generators

Achieving sampling rate from 160 MSa/S to 1GSa/s, frequency range from 1 µHz to 120 MHz.

Pulse generators offer the most comprehensive portfolio of stimulus solutions for the generation of digital and analog waveforms and data signals. Keysight offers various pulse generators:

• Pulse function arbitrary noise generators

Amplitude from 50 mV to 5Vpp, frequency 240 or 500 MHz (depending on the model)

• Pulse pattern generator

Number of outputs 1 or 2 (depending on the model), amplitude from 50 mV to 2 V, frequency from 15 MHz to 3,35 GHz and data capabilities: 12 MBit / channel; PRBS 2^n-1, n=5, 6,...15, 23, 31; RZ, NRZ, DNRZ, R1.

• Arbitrary waveform generator

Number of outputs 1, 2 or 4 (depending on the model), amplitude 2000 mVpp diff max, frequency >240 MHz.

The Keysight B1500A semiconductor parameter analyzer is an all-in-one device characterization analyzer designed for comprehensive semiconductor testing. This versatile instrument supports various measurement techniques, including IV, CV, pulse/dynamic IV, and more, making it an ideal choice for semiconductor testing applications. The mainframe and plug-in modules offer unmatched flexibility, enabling the characterization of various electronic devices, materials, semiconductors, active/passive components, and more.

Pendulum Instruments offers High Voltage Linear Amplifiers that are used by research institutes, R&D labs and component manufacturing industries, in a wide range of applications. Common examples are driving piezo actuators, MEMS, OLEDs, liquid crystals, etc.

Single channel systems:

F-series (F10A, F20A) – Low Cost series,

Output voltage ±100 V or ±150 V, output current 150 mA or 185 mA, bandwidth 1 MHz, Gain x10 or x20 (fixed);

A-series (A400. A600, A800) – High Voltage series

Output voltage from ±200 V to ±400 V, output current from 60 mA to 150 mA, bandwidth 300 MHz to 500 MHz, Gain x20 to x100 (fixed);

P-series (P100, P150, P200) – High Power series

Output voltage from ±50 V or ±100 V or from 0 to 150V , output current from 1 A to 2 A, bandwidth 60 KHz to 100 KHz, Gain x10 to x20 (fixed);

PV-series (F30PV, F70PV) – High Speed series

Output voltage from ±35 V or from 0 to 70V , output current from 1,5 A, bandwidth 5 MHz, Gain x10 (variable).

Dual channel systems:

F-series (F10AD, F20AD) – Low Cost series,

Output voltage ±100 V or ±150 V, output current 150 mA or 185 mA, bandwidth 1 MHz, Gain x10 or x20 (fixed);

A-series (A400D. A400DI, A600D, A800D,A800DI) – High Voltage series

Output voltage from ±200 V to ±800 V, output current from 60 mA to 150 mA, bandwidth 300 MHz to 500 MHz, Gain x20 to x100 (fixed);

Pendulum Frequency Distribution Amplifiers, FDA-301 and DA-36, offer an economical solution to low-jitter and long-range distribution of Frequency Reference and/or Time Synchronization Signals.

Frequency Distribution Amplifiers

FDA-301A, point to Multi-point Distribution amplifier

• Distribution up to 2 km for sine and pulse
• No Electro-magnetic noise pick-up
• No ground-current loops
• Smaller cables, lower weight, and lower cost
• No information “sniffing” possible

DA-36, Compact point to-point Distribution amplifier

• Distributes sine, pulse, and ToD signals over fiber and/or coax
• Narrowband sine input for distribution of reference frequency
• Pulse distribution of e.g. 1-pps or unmodulated IRIG time code
• 3 modular output slots provides easy upgradability in the field.
• Up to 18 fiber or 12 coax outputs
• No-noise and EMP-proof distribution over fiber
• Distribute up to 2 km over fiber
• Auto-change-over when connecting two input sources (Master-Slave)
• Optional DC power input for power redundancy

We provide calibration and instalation services for Keysight hardware.